Bought a 1991 Volvo 240 4cylinder 2.3L with 154k miles that has some lifter noise

Old Sep 30, 2009 | 09:50 AM
  #1  
umoms's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2009
Posts: 3
Likes: 0
Default Bought a 1991 Volvo 240 4cylinder 2.3L with 154k miles that has some lifter noise

I just bought a 1991 Volvo 240 4cylinder 2.3L with 154k miles that has some lifter noise?

Is this a easy way to repair this? Are the lifters adjustable? Any suggestions to quiet the noise down or anything? I don't see any leaks or notice any difference when driving.

Someone told me that this engine has a overhead cam and doesn't have lifters. Is that true? If so what could this, that sounds like lifters be?
 
Reply
Old Sep 30, 2009 | 10:20 AM
  #2  
adub96's Avatar
Senior Member
Joined: Mar 2006
Posts: 576
Likes: 2
From: florida
Default

Get them shimmed at a local shop or borrow the kit from IPD, also there is a little bushing under the bucket that likes to disintegrate after a few years in service, can replace those and it will quite the "lifters" down. There actual name is valve tappet or cam follower, but for all intensive purposes they are basically lifters.
 
Reply
Old Sep 30, 2009 | 11:13 AM
  #3  
umoms's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2009
Posts: 3
Likes: 0
Default

Ok I did some more reading and I heard changing the valve hushers might help. I called my Volvo dealer and they did not know what that was but they sent me a picture.

Can anyone determine which part is the valve husher descibed in this article is

http://www.brickboard.com/FAQ/700-90...TipRubberSeals


 
Reply
Old Sep 30, 2009 | 12:20 PM
  #4  
bubba240's Avatar
Senior Member
Joined: Mar 2008
Posts: 734
Likes: 1
Default

it's number 5 in the attached picture ... hopefully the dealer can find the part number.
 
Attached Thumbnails Bought a 1991 Volvo 240 4cylinder 2.3L with 154k miles that has some lifter noise-valve.jpg  
Reply
Old Sep 30, 2009 | 12:46 PM
  #5  
umoms's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2009
Posts: 3
Likes: 0
Default

I got the part number. Its 35144332 Of course none of the dealers stock them. Any ideas how long it should take to replace all 8?
 
Reply
Old Sep 30, 2009 | 01:56 PM
  #6  
adub96's Avatar
Senior Member
Joined: Mar 2006
Posts: 576
Likes: 2
From: florida
Default

http://www.fcpgroton.com/product-exe...ategory_id/121

probably about 2 hours, You have to remove the timing belt, or at least take it off, remove the valve cover, remove the cam, pull the buckets, and then reverse put it back together.
 
Reply
Old Oct 4, 2009 | 05:19 PM
  #7  
redbottle's Avatar
Senior Member
Joined: Jul 2009
Posts: 298
Likes: 1
From: Orange, CA
Default

Hey my 86 240 wagon does make the same noise and I was wondering if it was time for a valve job?

I used different injectors from a 740 and noticed the clicking noise from the valves stopped and only the injector clicking was audible...what gives?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jeffreyjohntrifiletti
Volvo S80
0
Jun 1, 2015 09:37 PM
jeffreyjohntrifiletti
Volvo S80
0
Jun 1, 2015 09:32 PM
hikermtnbiker
Volvo 850
22
Dec 9, 2012 08:22 AM
98_V70_T5
Volvo V70
12
Oct 15, 2009 07:30 PM
volvos70t5boy
Volvo S70
4
Mar 25, 2009 10:38 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:06 AM.