I recently purchased a 1994 940 T and have been chipping away at problems. I have nasty cold start issue which I have been chipping away at systematically. When Zhenn (the 940) is off I have 0 kpa fuel pressure. When running I have 300 kpa. While replacing bad vacuum lines against the diagram under the hood, I saw that there are to be 2 lines off the manifold going to a "canister."
Those lines are gone --- see photo 01 below.
There is another line that goes from the "canister" to the fuel tank. That line has been cut where something should be --- see photo 02 below.
My Chilton's is of no help with this, so I need your help and I need to know where I can get the parts (without going to the dealer).
Peace.