How are codes read on a 1985 B230?
Thread Starter
|
Junior Member
Joined: Sep 2013
Posts: 14
Likes: 0
How are codes read on a 1985 B230?
The car's immobile, I can't take it to a dealer. So how do I read codes on an 85 240 (pre obd)? I've heard there's a special volvo reader that plugs in between the engine harness & the ECU. If true, is there someone that rents them?
thanks
thanks
no mo volvo
Joined: Oct 2010
Posts: 11,289
Likes: 109
From: 37 North on the left coast
early LH II didn't have any useful codes. it was nearly analog.
instead, you check all the sensors at the ECU plug according to the greenbook on LH injection ...
but first... Does it have spark? are the fuel pumps running ? is the main engine fuse good ?
instead, you check all the sensors at the ECU plug according to the greenbook on LH injection ...
but first... Does it have spark? are the fuel pumps running ? is the main engine fuse good ?
Last edited by pierce; Jun 14, 2015 at 04:04 AM.
Thread Starter
|
Junior Member
Joined: Sep 2013
Posts: 14
Likes: 0
early LH II didn't have any useful codes. it was nearly analog.
instead, you check all the sensors at the ECU plug according to the greenbook on LH injection ...
but first... Does it have spark? are the fuel pumps running ? is the main engine fuse good ?
instead, you check all the sensors at the ECU plug according to the greenbook on LH injection ...
but first... Does it have spark? are the fuel pumps running ? is the main engine fuse good ?
Thread
Thread Starter
Forum
Replies
Last Post
