Hey everyone,
im fixing my 1983 242 GLT (or 240 turbo) and i took off the spark plug cables from both ends (the distributor cap and the spark plugs). without marking which cable goes where
soo anyone have a diagram that shows which one goes where? its not in the hanes manual
Thanks!

 

I know the firing order is 4-3-1-2 but no picture of them on there.
If you remove the cap the Dist should be marked for position 1 with a notch in the housing.

 

This post has been moved from New Members Area. Notified the original poster.


JPN

 

ok...if your looking at the dist. from the front of the car...the first sparkplug goes to the left lower on the dist. #2 spark to the lower right on dist. #3 on upper left on Dist. #4 on upper right.