I am in the middle of changing my timing belt , tensioner , and crank seal .
I removed the centre bolt for the crankshaft and the pulley does not come off ... this may be a dumb question but do i need a puller to get the pulley off on this application ??
There is not enough room to get my harmonic balance puller in there ...
any suggestions ?

 

Usually a prybar between the pulley and the timing cover carefully prying working from side to side will get it off.
Becareful not to break the timing cover.

 

It must be stuck on there good caus i screwed around with it for an hour ! .....
Guess i will give it another go