thank you so muchfor everyones help!
just wonder if it's acommon sympthom on 850's??
there is no faulty codes, but
when i put my caron reverse it feels like it does notshiftsverysmooth,
it happen especially when mycar is wormed up,
so if i wouldgo forward than stop andshiftto reverseit would take 1-2 sec. than i wouldfeel a little push.
it does not happend very often though.
anywaywhatmight cause this problem and what a solution?
thank you again!

 

It is getting old.
Maybe try getting the Lucas stop slip aditive and add to the fluid and see if it helps.
I have a problem with the tranny in the yellow car.
I am going to try it once I can find it locally.

 

Ditto on the Lucas but this didn't help my Drive -> Reverse "bumping". What I do is throw it in neutral, wait 2 seconds for the tranmission to fully disengage (you'll feel the car release the pressure), and then go to reverse. It never bumps doing it that way. I don't know if it does anything internally but it sure sounds and feels a heck of a lot better. I also avoid parking where I need to back out if I can - ie pull straight into parking spaces so I just need to drive straight out of them.

 

will buy some Lucas next week, not sure where tofind itthough,
hope it would help!

 

Please let me know if the Lucas seems to help, our 95 850 Turbo with 183 K does the same bump when warm going into reverse and I would like to at least ease it up a bit

 

Will do!

 

I've seen Lucas at Autozone, Advance, maybe even at Wal-mart. It shouldn't be too hard to find. Please let us know your experience- I know we'd all like to hear from TECH. Mine doesn't shift so perfect between 2-3, thinking of trying it myself.

Good luck!