OK, this may sound stupid but I'm confused on the IPD rear anti-sway bar kit for my 2008 C70.


Is this the pin or the ball end style link?


I purchased their Kit #110419. Page two of the instructions says if you have earlier model remove the links etc. The pictures depict what is on my car. The sway bar end is vertical with the hole drilled in a horizontal orientation. Easy, that's not what's confusing. It's the installation that has me stuck. Page three item 8 picture on the bottom left shows two different length bolts and spacers. The kit I received only had the long bolts and spacers. I contacted IPD and they are sending me the shorter bolts and sleeves. Here's where I get confused. The instructions refer to a shorter (pin/bolt style), and a longer (ball end style) and which corresponding hardware to use. But nowhere in my search can I find what defines a pin/ bolt vs a ball end style hardware. I think I know which is which but after a 33 year career in aviation I know I can't just think it. Am I overthinking it? See pic above. Is that the pin or ball end style link.

Thanks in advance for your kind assistance.