Upper Mount Question
Thread Starter
|
Member
Joined: May 2009
Posts: 25
Likes: 0
Upper Mount Question
I noticed a sort of dull thud from the engine compartment area when I let off or step on the accelerator in my '01 C70 convert. I found that the bushing in my upper engine mount is loose and I can actually move the torque rod up and down at the engine mount end. It's nice and tight at the firewall. I imagine this is causing the thud. Should the rubber bushing be tight in the aluminum bracket or is it normal for it to be loose?
Donny
Donny
Last edited by Donny1973; May 29, 2009 at 10:16 AM.
Senior Member
Joined: Dec 2008
Posts: 425
Likes: 3
I noticed a sort of dull thud from the engine compartment area when I let off or step on the accelerator in my '01 C70 convert. I found that the bushing in my upper engine mount is loose and I can actually move the torque rod up and down at the engine mount end. It's nice and tight at the firewall. I imagine this is causing the thud. Should the rubber bushing be tight in the aluminum bracket or is it normal for it to be loose?
Donny
Donny
Thread
Thread Starter
Forum
Replies
Last Post
