Clear coat paint on 2000 S40?
I have been hearing that the 2000 S40 did not come with clearcoat? If this is true, what can I do to extend the life of the paint, it is red now, and I would like it to remain that color. I bought Metro Guardian Automotive paint protector and it just came today so I haven't put it on yet. What would be the cost to have a reliable shop paint on a clear coat? Is it even possible? What are your tips on keeping the paint looking good!?
Thanks!
Thanks!
Oh lord! I was looking for more info on that metro guardian stuff and just to let you know how obscure this stuff is, this thread is the 4th result on google!
LOL.
Wouldn't recommend this stuff anyway, not that great.
LOL.
Wouldn't recommend this stuff anyway, not that great.
Is there any way to tell whether there is clear coat left?
I'm planning a 2 day detail on Sunday and Monday in which I am going to wash, strip old wax, buff the whole car with ScratchX, apply Klasse Sealant and Wax on top of that.
My thread on autopia: http://www.autopia.org/forum/car-det...ml#post1318986
I'm planning a 2 day detail on Sunday and Monday in which I am going to wash, strip old wax, buff the whole car with ScratchX, apply Klasse Sealant and Wax on top of that.
My thread on autopia: http://www.autopia.org/forum/car-det...ml#post1318986
My detail starts as soon as the temp gets above 45.
Day one is DONE!!
What I accomplished:
1. Wash
2. Claybar'd
3. ScratchX'd the hood, trunklid, and roof (see pics!)
4. Applied Back to Black (reapply tomorrow again)
5. Cleaned out drains (leaves, etc)
6. Installed new CF wiper blades
7. Silicon PIAA windshield treatment applied
You can clearly see the line on the hood where I have already done a pass with ScratchX and where I have not! AWESOME! I applied once more after this.
RESULT:



Here's the question: So I have successfully removed the watersport that I believe were caused by the Klasse kit. Should I tempt fate and attempt to apply that again?
What I accomplished:
1. Wash
2. Claybar'd
3. ScratchX'd the hood, trunklid, and roof (see pics!)
4. Applied Back to Black (reapply tomorrow again)
5. Cleaned out drains (leaves, etc)
6. Installed new CF wiper blades
7. Silicon PIAA windshield treatment applied
You can clearly see the line on the hood where I have already done a pass with ScratchX and where I have not! AWESOME! I applied once more after this.
RESULT:



Here's the question: So I have successfully removed the watersport that I believe were caused by the Klasse kit. Should I tempt fate and attempt to apply that again?
I recall some comment about this on Swedespeed some time ago. Some of the colors - the metallics - had a clear coat, but the solid colors did not. Perhaps you could cross reference the paint code to get better info. I have the black sapphire metallic, and I know it has a clear coat. No black residue comes off with cleaners.
It's basically a really light polish that has a tiny bit of grit in it that dissipates while you polish. It basically takes off the top layer of paint revealing the shiny new bottom layer. You can get it at Target, Walmart, etc. It's like $10.00.
Thread
Thread Starter
Forum
Replies
Last Post
vjaneczko
Detailing
8
Sep 11, 2013 10:25 PM
WhosNext905515
Volvo S60 & V60
4
Apr 26, 2011 02:58 PM









