S40 clutch master cylinder.
Thread Starter
|
Junior Member
Joined: Sep 2021
Posts: 1
Likes: 0
S40 clutch master cylinder.
Good Evening,
My Name is Ray and im a first time user, so be gentle please....
Anyhow, i am currently working on a 2009 s40 1.6 Volvo. I am replacing the clutch master cylinder. I have had a complete nightmare, first of all removing the pedal, with the top nut being a pain. Then Trying to get the rebuilt pedal back in, with the master cylinder Attached.
Do I need to remove the other pedals to enable the fitting. Do I put the pedal in then the cylinder. ?
Also should there be 2 pedal return springs on the pedal. As there is currently only one and that is broken?
Any Help would be greatly appreciated.
Thank you.
My Name is Ray and im a first time user, so be gentle please....
Anyhow, i am currently working on a 2009 s40 1.6 Volvo. I am replacing the clutch master cylinder. I have had a complete nightmare, first of all removing the pedal, with the top nut being a pain. Then Trying to get the rebuilt pedal back in, with the master cylinder Attached.
Do I need to remove the other pedals to enable the fitting. Do I put the pedal in then the cylinder. ?
Also should there be 2 pedal return springs on the pedal. As there is currently only one and that is broken?
Any Help would be greatly appreciated.
Thank you.
Junior Member
Joined: Jan 2024
Posts: 2
Likes: 0
Julian
Good Evening,
My Name is Ray and im a first time user, so be gentle please....
Anyhow, i am currently working on a 2009 s40 1.6 Volvo. I am replacing the clutch master cylinder. I have had a complete nightmare, first of all removing the pedal, with the top nut being a pain. Then Trying to get the rebuilt pedal back in, with the master cylinder Attached.
Do I need to remove the other pedals to enable the fitting. Do I put the pedal in then the cylinder. ?
Also should there be 2 pedal return springs on the pedal. As there is currently only one and that is broken?
Any Help would be greatly appreciated.
Thank you.
My Name is Ray and im a first time user, so be gentle please....
Anyhow, i am currently working on a 2009 s40 1.6 Volvo. I am replacing the clutch master cylinder. I have had a complete nightmare, first of all removing the pedal, with the top nut being a pain. Then Trying to get the rebuilt pedal back in, with the master cylinder Attached.
Do I need to remove the other pedals to enable the fitting. Do I put the pedal in then the cylinder. ?
Also should there be 2 pedal return springs on the pedal. As there is currently only one and that is broken?
Any Help would be greatly appreciated.
Thank you.
Thread
Thread Starter
Forum
Replies
Last Post
Edwin Roy Franklin
Volvo 260, 760 & 960
1
Aug 31, 2010 04:46 PM
