When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The plastic cap that snaps onto the driver door handle to hide the manual lock will not stay on. There should be a release mechanism (right photo) activated by a screw driver through a hole in the bottom of the cap. My release mechanism is missing. When I look at a replacement lock ($187), I see no evidence that the mechanism is included. I am looking to find out what assembly, if any, that mechanism comes with or if it is a stand-alone part (unlikely).
I have a new plastic cover complete with tab. There is nothing on the door or the lock for the tab to grab on to. I see in an assembly drawing that there is a gasket that looks like it has a feature to grab the tab. When I remove my lock, I see no such gasket (#4). The lower two (black) details are captured from an alternate gasket picture. Lower right one is a blow up of what I hope is the locking mate.