Wheel Hub/Bearing replacement
Thread Starter
|
Junior Member
Joined: May 2009
Posts: 3
Likes: 0
Wheel Hub/Bearing replacement
Desperately need help Wheel hub/bearing change on S60 AWD. The posts I read all make it sound so easy. However I cannot get the wheel hub off the car to change it out. Any and all help will be greatly appreciated.
Joe
Joe
Member
Joined: Feb 2009
Posts: 95
Likes: 1
Year? Front or rear?
Some of the cars came with lock tight on the hub splines for some kind of noise they were makin.Well when it comes time to swap out hubs,the hub would seize itself to the axle splines.It takes some swingin with a BFH but it will come off.
Four bolts hold it to the spindle assembly from the backside and one bolt in the center to hold the axle shaft.
Some of the cars came with lock tight on the hub splines for some kind of noise they were makin.Well when it comes time to swap out hubs,the hub would seize itself to the axle splines.It takes some swingin with a BFH but it will come off.
Four bolts hold it to the spindle assembly from the backside and one bolt in the center to hold the axle shaft.
Last edited by Blownby; May 12, 2009 at 04:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post
puxnstx
Volvo V70
3
Dec 13, 2014 11:36 AM
Volvo Newbie
Volvo S40
5
Dec 28, 2011 09:00 AM
