hi new guy here, needs some info
hi
just purchased a
1998 s70 t-5
with 220k miles in really clean condition
automatic etc etc
has a few codes
po102,po300,po302,po304,po410,po455,po505
and has a decent oil leak from somewhere on the backside of the engine, cant visually see it from the top
what should i start with first? plugs wires cap and rotor?
thanks





just purchased a
1998 s70 t-5
with 220k miles in really clean condition
automatic etc etc
has a few codes
po102,po300,po302,po304,po410,po455,po505
and has a decent oil leak from somewhere on the backside of the engine, cant visually see it from the top
what should i start with first? plugs wires cap and rotor?
thanks





Last edited by bonecrusher; Apr 11, 2011 at 09:31 PM.
think that could be my oil leak? is there any real common oil leaks on these? mine is leaking i believe backside of engine but i couldn't see where but its a pretty decent leak and only when it warms up
I have a thread about oil leaks on our S70. I also did a write up on stopping the cam seal leaks (replacement). There was a little plate on the back of our motor that was leaking, I had to order and replace the gasket. I have one or 2 more gaskets if you need them.
The turbo return line connection is the most common leak back there.
The turbo return line connection is the most common leak back there.
If you look at the mount and shaft, just above the shaft and right of the mount, you will see the turbo. Just right of the turbo you can see the turbo return oil line that is bone dry here, it has the line going through the bracket with a bolt or two with a seal behind the bracket.
Thread
Thread Starter
Forum
Replies
Last Post




