Diagnostic Codes For a S80 T6
Thread Starter
|
Junior Member
Joined: Dec 2008
Posts: 14
Likes: 0
From:
Diagnostic Codes For a S80 T6
I got these codes and i cant quite understand them.The codes are Troubleshooting P1332, and Troubleshooting P0013. The codes are causing the diagnostics to mark check engine.
Administrator
Joined: Sep 2004
Posts: 36,349
Likes: 45
From: Orlando, Florida
RE: Diagnostic Codes For a S80 T6
Did someone just to the timing belt?
If the solenoid is bad you might be able to replace it your self. There is only 4 screws holding the solenoid on.
If the solenoid is bad you might be able to replace it your self. There is only 4 screws holding the solenoid on.
Administrator
Joined: Sep 2004
Posts: 36,349
Likes: 45
From: Orlando, Florida
RE: Diagnostic Codes For a S80 T6
Yes it is once you remove the black spark plug cover by the timing belt there is a round thing attached to a square looking thing. That is it it bolts to the cam cover just over one of the cam shafts.
Administrator
Joined: Sep 2004
Posts: 36,349
Likes: 45
From: Orlando, Florida
RE: Diagnostic Codes For a S80 T6
To really know if it would need to be replaced you would have to have the proper software to see if working or not.
But usually that is the problem but not all the time it is about a 60/40 it is bad.
But usually that is the problem but not all the time it is about a 60/40 it is bad.
Thread
Thread Starter
Forum
Replies
Last Post
