code reader
#2
#4
![Default](/forum/images/icons/icon1.gif)
So, as i understand it, an OBD II reader will be about $100 (new) but will only read engine codes. But it will allow me to reset??
And if I want to read any and all codes and interface with VADIS it's +- $2000?
Sounds like OBD II is the way to go.
I would not know where to plug it in (be polite)
Tks
Rob
And if I want to read any and all codes and interface with VADIS it's +- $2000?
Sounds like OBD II is the way to go.
I would not know where to plug it in (be polite)
Tks
Rob
#5
![Default](/forum/images/icons/icon1.gif)
OBDII plugs in under the dash on the driver's side near the hood release. There is a little door that flips open that actually has OBDII printed on it. They're great for resetting CEL or service lights. Mine was a cheap Ebay one and I've had to use it several times for the stupid evap leak that comes up once every week or two.
#6
#7
![Default](/forum/images/icons/icon1.gif)
Hi, afte 99 models one should also check this
www.ppc-diagnostic.comfor full volvo support from sweden and 100 Euros ie. 125USD
.
tapsa
www.ppc-diagnostic.comfor full volvo support from sweden and 100 Euros ie. 125USD
.
tapsa
Thread
Thread Starter
Forum
Replies
Last Post