heater controls
Thread Starter
|
Junior Member
Joined: May 2009
Posts: 4
Likes: 0
heater controls
Hi all,
enjoy reading all the posts when I can.
My 2000 V70 XC 225,000 miles, bought it with a burned valve and did a head and valve job and she's running good.
- the heater blower stopped working.
It is the electronic cabin controls system. The fuse is OK.
I've got the lower dashboard and "knee bolster"???? out and have checked plugs (connectors) on the ECC, cabin temp sensor, power module and fan.
I have 12V to the power module but no V to the fan itself.
I have the VADIS software, but I was surprised to find very little electrical info in it.
Does anyone have any diagrams of what kind of signals should be on the 4 wiires to the power module?
anyone have any suggestions?
enjoy reading all the posts when I can.
My 2000 V70 XC 225,000 miles, bought it with a burned valve and did a head and valve job and she's running good.
- the heater blower stopped working.
It is the electronic cabin controls system. The fuse is OK.
I've got the lower dashboard and "knee bolster"???? out and have checked plugs (connectors) on the ECC, cabin temp sensor, power module and fan.
I have 12V to the power module but no V to the fan itself.
I have the VADIS software, but I was surprised to find very little electrical info in it.
Does anyone have any diagrams of what kind of signals should be on the 4 wiires to the power module?
anyone have any suggestions?
Last edited by geo; Oct 27, 2010 at 08:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
pete8475
Volvo S80
6
Jan 31, 2025 01:06 AM