Hi All,

I'm swapping out my calipers on my 83 244. The front ones have the double piston and 3 bleeder screws per caliper. Does anyone have any experience in bleeding this design?

Thanks in advance.

 

This is the order I use. I got it out of the Haynes manual for my '90 240:

1) Rear driver side caliper
2) Front driver side caliper upper bleed valve
3) Front passenger side caliper upper bleed valve
4) Rear passenger side caliper
5) Front passenger side caliper outer bleed valve
6) Front passenger side caliper inner bleed valve
7) Front driver side caliper outer bleed valve
8) Front driver side caliper inner bleed valve