Greetings my fellow bricksters,
I need to replace the right rear door vent window on my 94 940 wagon thanks to my neighbor's mowing techniques. I have yet to take anything apart. I have searched the web for any ideas on how to approach this with little success concerning the 940. Have any of you fine people ever had to replace one of these and how difficult was it to complete? Any suggestions,pointers, things to watch out for?

Thanks in advance.


Tim

 

Did it long time ago so details are fuzzy but start by taking off the door panel. Then there is a bolt holding the vertical support. Anyway, not a big deal. Once you have the panel off I am sure it will be apparent. Sorry, not much help.

 

Thank you Lev. I wasn't sure if this was the type that was installed like a windshield with an adhesive or not. I will tear into it this weekend assuming I can locate a suitable replacement. Do you remember if you had to remove the door window to get this quarter out or was there enough clearance with the window down?

Amazingly after a 100 mile round trip to work the glass although shattered is still intact. I have placed strips of clear box tape on the inside to prevent it from falling to pieces. Looks like poop but I guess no worse then a piece of taped cardboard.

Tim

 

The back windows don't roll down all the way so I believe the window would have to come out but just get in there and see... I am not sure.