Engine Stalled - Metallic Grinding Noise
Greetings,
A few days ago while driving my '93 940 Turbo wagon with 205K. I noticed a loud metallic scraping noise coming from the car. It sounded exactly like one would expect if the muffler was dragging. However, looking under the chassis I found nothing.
Today I heard the same noise, checked underneath once again and nothing was hanging. I got inside and drove away, heard the 'metal scrape' noise and the car stalled. I am unable to start it, but the engine does turn over.
My best guess is a timing belt issue? From research here I also understand that my vehicle has the B230FT engine which is non-interference.
It's now at the local tow shop awaiting inspection 'most likely Thursday'. Any educated guesses at what the problem might be? I've had no other mechanical problems/symptoms. Thanks.
A few days ago while driving my '93 940 Turbo wagon with 205K. I noticed a loud metallic scraping noise coming from the car. It sounded exactly like one would expect if the muffler was dragging. However, looking under the chassis I found nothing.
Today I heard the same noise, checked underneath once again and nothing was hanging. I got inside and drove away, heard the 'metal scrape' noise and the car stalled. I am unable to start it, but the engine does turn over.My best guess is a timing belt issue? From research here I also understand that my vehicle has the B230FT engine which is non-interference.
It's now at the local tow shop awaiting inspection 'most likely Thursday'. Any educated guesses at what the problem might be? I've had no other mechanical problems/symptoms. Thanks.
Last edited by Kivstev; Sep 29, 2009 at 05:25 PM.
Turns out it was a broken bolt in the tranny/flywheel area that hit and knocked out a sensor in that area. That was the cause of the metal noise. Somehow my timing belt also jumped.
Glad it's not an interference engine...
Glad it's not an interference engine...
Thread
Thread Starter
Forum
Replies
Last Post
pgrossjr
For Sale / Trade - Archive
3
May 17, 2010 06:20 AM




