The Kid's 1988 244 brick - a father/son "project"
#42
The following users liked this post:
TheKidsBrick244 (08-15-2020)
#43
#44
Today the kid got a quote for a new exhaust. The baffles in the muffler are all bouncing around and rattling. It's the original muffler.
He is having the resonator and cat removed (no emissions testing for cars over 20 years old in NH), and a high flow muffler installed, with a tasteful tip to end it, straight out the back. He's paying for this one, all stainless.
Next after this is suspension, can and timing - but that's in the spring.
He is having the resonator and cat removed (no emissions testing for cars over 20 years old in NH), and a high flow muffler installed, with a tasteful tip to end it, straight out the back. He's paying for this one, all stainless.
Next after this is suspension, can and timing - but that's in the spring.
#48
So I have been playing around with sub enclosures. I built a new box for that huge JL 12W3V2-D2 sub with the same airspace, but different shape. We set it up to fire up at the hat shelf, and it rattled the **** out of everything.
This was temporary because I got my hands on an old school JL "Micro Sub", a half pipe style box that was preloaded with 3 - JL 8W6 subs - but they were all in disrepair. I have set those subs aside to repair (re-cone and re-foam) and reconditioned the box itself. I need a lot more practice at carpeting though. I loaded it with some cheap 8" subs, and wired them in series to get a 2.66 ohm load (the amp is 2 ohm stable)
I'm still trying out different positions for the sub - I'm probably going to add some "feet" to the box to make downfire. These Skar subs really impressed me for the price point.
Besides audio, right now the kid is saving up to do the suspension. The rear looks pretty saggy, especially on the driver's side. He want's the BC Coilovers, but I don't know how to weld. I was thinking he should just get new shocks/struts and lowering coils. Suggestions?
This was temporary because I got my hands on an old school JL "Micro Sub", a half pipe style box that was preloaded with 3 - JL 8W6 subs - but they were all in disrepair. I have set those subs aside to repair (re-cone and re-foam) and reconditioned the box itself. I need a lot more practice at carpeting though. I loaded it with some cheap 8" subs, and wired them in series to get a 2.66 ohm load (the amp is 2 ohm stable)
I'm still trying out different positions for the sub - I'm probably going to add some "feet" to the box to make downfire. These Skar subs really impressed me for the price point.
Besides audio, right now the kid is saving up to do the suspension. The rear looks pretty saggy, especially on the driver's side. He want's the BC Coilovers, but I don't know how to weld. I was thinking he should just get new shocks/struts and lowering coils. Suggestions?
#50
#52
Thread
Thread Starter
Forum
Replies
Last Post