Vacuum Hose Identification
#1
Vacuum Hose Identification
Hi all!
Just recently picked up my first Volvo 240DL from a coworker on the cheap.
I need help with identifying a small vacuum hose that has broken off close to the firewall.
The hose comes out of the firewall slightly left of center and about 2 inches below the hood seal lip. It is a single hose with an odd looking rectangular tab on the fitting where it comes out of the firewall. There is a bend on the remaining portion of the hose that suggests the hose went towards the drivers side of the engine bay, but I can not find anything with a missing hose. The hose is very small, on the order of maybe 1/8th of an inch OD. I havent been able to find where the hose goes once inside the dash.
Any help is appreciated.
Just recently picked up my first Volvo 240DL from a coworker on the cheap.
I need help with identifying a small vacuum hose that has broken off close to the firewall.
The hose comes out of the firewall slightly left of center and about 2 inches below the hood seal lip. It is a single hose with an odd looking rectangular tab on the fitting where it comes out of the firewall. There is a bend on the remaining portion of the hose that suggests the hose went towards the drivers side of the engine bay, but I can not find anything with a missing hose. The hose is very small, on the order of maybe 1/8th of an inch OD. I havent been able to find where the hose goes once inside the dash.
Any help is appreciated.
#3
#6
Thread
Thread Starter
Forum
Replies
Last Post