hey everyone my 960 passenger side seat has no power absolutely no movement I swapped relays with drivers side still no luck, swapped the circuit breaker and checked the fuses I was looking for the micro switch but can't seem to locate it, could the whole switch be bad?

 

Well I swapped the controller under the seat and still nothing, I jumped the stopped switch still nothing is there a way to run jumper wires so I can get it to move? I know there's power there

 

The wiring diagram shows the colors for the motor wires, you need to give both battery and ground to them as the controller/switch reverses them so each motor can move in both directions.