Volvo 850 Made from 1993 to 1997, this Volvo line was available in both a wagon and a sedan, both with were graced with several trim levels.

Manual Swap pedal question

Thread Tools
 
Search this Thread
 
  #1  
Old 11-18-2013, 10:17 AM
91shelby's Avatar
Senior Member
Thread Starter
Join Date: Dec 2009
Location: Poulsbo Washington
Posts: 854
Likes: 0
Received 1 Like on 1 Post
Default Manual Swap pedal question

What is the easiest way to get the auto brake pedal assembly out? Ive undone the mounting bolts but cant figure out how to get it all the way out.
 
  #2  
Old 11-18-2013, 02:33 PM
boxpin's Avatar
Super Moderator
Join Date: May 2009
Location: Rocklin, Ca
Posts: 2,702
Likes: 0
Received 0 Likes on 0 Posts
Default

Unbolt the steering column...makes a huge difference.
 
  #3  
Old 11-19-2013, 10:16 AM
91shelby's Avatar
Senior Member
Thread Starter
Join Date: Dec 2009
Location: Poulsbo Washington
Posts: 854
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by boxpin
Unbolt the steering column...makes a huge difference.
I presume those are the 2 bolts just up from the brake pedal assembly just under the front edge of the dash?
 
  #4  
Old 11-24-2013, 06:34 PM
91shelby's Avatar
Senior Member
Thread Starter
Join Date: Dec 2009
Location: Poulsbo Washington
Posts: 854
Likes: 0
Received 1 Like on 1 Post
Default

which way is the spring supposed to go for the clutch pedal, coil to the front or rear?
 
  #5  
Old 11-25-2013, 12:26 AM
91shelby's Avatar
Senior Member
Thread Starter
Join Date: Dec 2009
Location: Poulsbo Washington
Posts: 854
Likes: 0
Received 1 Like on 1 Post
Default

also which shifter cable goes to which lever on the tranny? m56h
 
  #6  
Old 11-26-2013, 11:47 AM
boxpin's Avatar
Super Moderator
Join Date: May 2009
Location: Rocklin, Ca
Posts: 2,702
Likes: 0
Received 0 Likes on 0 Posts
Default

Side to side goes to the skinny arm. Gear to gear (1 to 2, 3 to 4) go to the bigger block.


I'll have to look again for the springs.
 
  #7  
Old 11-26-2013, 01:06 PM
91shelby's Avatar
Senior Member
Thread Starter
Join Date: Dec 2009
Location: Poulsbo Washington
Posts: 854
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by boxpin
Side to side goes to the skinny arm. Gear to gear (1 to 2, 3 to 4) go to the bigger block.


I'll have to look again for the springs.
ok so the ball under the shifter goes to the skinny(vertical) arm and the front to back that's on the driver side outside of the shifter goes to the horizontal triangular arm correct?

Thanks
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
turbo-max
Private Wanted Classifieds - Archive
3
11-12-2014 07:36 PM
pistorman
Private Wanted Classifieds - Archive
0
06-23-2013 11:37 PM
ded137t5r
Volvo 850
5
01-23-2013 01:52 PM
KenE
Volvo S60 & V60
0
10-03-2011 09:17 PM
turbo matt
Volvo V70
1
02-25-2011 06:46 PM



Quick Reply: Manual Swap pedal question



All times are GMT -5. The time now is 07:27 AM.