1st gen c70 convertible overhead pillar mistake
Thread Starter
|
Junior Member
Joined: Apr 2013
Posts: 18
Likes: 0
1st gen c70 convertible overhead pillar mistake
Hi,
This is my first convertible, I made a big mistake, the overhead console had a crack, so I start breaking it down carefully, I thought I can use the C70/S70 overhead console and fit it in after break the dome light out of the hole. To my surprise is it an entire assembly as shown below as #1:
http://www.volvopartswebstore.com/im...e/GR-78787.jpg
Question now:
1- how to remove the #1 overhead assembly with the overhead console?
2- has anyone tried to fit a c70 coupe/s70 overhead console into that hole once the old overhead console has been removed?
This is my first convertible, I made a big mistake, the overhead console had a crack, so I start breaking it down carefully, I thought I can use the C70/S70 overhead console and fit it in after break the dome light out of the hole. To my surprise is it an entire assembly as shown below as #1:
http://www.volvopartswebstore.com/im...e/GR-78787.jpg
Question now:
1- how to remove the #1 overhead assembly with the overhead console?
2- has anyone tried to fit a c70 coupe/s70 overhead console into that hole once the old overhead console has been removed?
Thread
Thread Starter
Forum
Replies
Last Post
liweih21
Volvo C70
2
May 28, 2014 05:08 PM