06 S40 Outside Temperature Sensor Is Wrong No A/C and Gas Gauge Stopped Working
I hope someone has some advice on repairing this.
My outside Temp sensor reads -28 in Tampa Florida March 5, 2017!
I have been through many threads here and I am looking for someone who has found a solution for repairing the ambient temp sensor.
It is causing my A/C and my fuel gauge to not work correctly.
Here is what I have done from what I found on these threads:
Took the harness apart add grease look for corrosion = no corrosion
Took the sensor clip out to check wires = was good
No codes are displayed at this time.
Anyone found a solution?
I would be very greatful for any solutions or directions to solve this.
Thanks
Quickstrong

My outside Temp sensor reads -28 in Tampa Florida March 5, 2017!

I have been through many threads here and I am looking for someone who has found a solution for repairing the ambient temp sensor.
It is causing my A/C and my fuel gauge to not work correctly.
Here is what I have done from what I found on these threads:
Took the harness apart add grease look for corrosion = no corrosion
Took the sensor clip out to check wires = was good
No codes are displayed at this time.
Anyone found a solution?

I would be very greatful for any solutions or directions to solve this.
Thanks

Quickstrong
I hope someone has some advice on repairing this.
My outside Temp sensor reads -28 in Tampa Florida March 5, 2017!
I have been through many threads here and I am looking for someone who has found a solution for repairing the ambient temp sensor.
It is causing my A/C and my fuel gauge to not work correctly.
Here is what I have done from what I found on these threads:
Took the harness apart add grease look for corrosion = no corrosion
Took the sensor clip out to check wires = was good
No codes are displayed at this time.
Anyone found a solution?
I would be very greatful for any solutions or directions to solve this.
Thanks
Quickstrong

My outside Temp sensor reads -28 in Tampa Florida March 5, 2017!

I have been through many threads here and I am looking for someone who has found a solution for repairing the ambient temp sensor.
It is causing my A/C and my fuel gauge to not work correctly.
Here is what I have done from what I found on these threads:
Took the harness apart add grease look for corrosion = no corrosion
Took the sensor clip out to check wires = was good
No codes are displayed at this time.
Anyone found a solution?

I would be very greatful for any solutions or directions to solve this.
Thanks

Quickstrong
Thank You!
I hope someone has some advice on repairing this.
My outside Temp sensor reads -28 in Tampa Florida March 5, 2017!
I have been through many threads here and I am looking for someone who has found a solution for repairing the ambient temp sensor.
It is causing my A/C and my fuel gauge to not work correctly.
Here is what I have done from what I found on these threads:
Took the harness apart add grease look for corrosion = no corrosion
Took the sensor clip out to check wires = was good
No codes are displayed at this time.
Anyone found a solution?
I would be very greatful for any solutions or directions to solve this.
Thanks
Quickstrong

My outside Temp sensor reads -28 in Tampa Florida March 5, 2017!

I have been through many threads here and I am looking for someone who has found a solution for repairing the ambient temp sensor.
It is causing my A/C and my fuel gauge to not work correctly.
Here is what I have done from what I found on these threads:
Took the harness apart add grease look for corrosion = no corrosion
Took the sensor clip out to check wires = was good
No codes are displayed at this time.
Anyone found a solution?

I would be very greatful for any solutions or directions to solve this.
Thanks

Quickstrong
#30716713 $11.33
Tim
Tim,
Thanks for the info. Can I just splice the wires in. I mea do I just cut the wires on the old one and splice the new one in?
How would I pull the wires from the old one out of the door harness?
Thanks, I appreciate it.
Thanks for the info. Can I just splice the wires in. I mea do I just cut the wires on the old one and splice the new one in?
How would I pull the wires from the old one out of the door harness?
Thanks, I appreciate it.
there is a junction at the sensor
Thread
Thread Starter
Forum
Replies
Last Post
J. H. McCharen
Volvo S70
6
May 26, 2014 11:26 AM
rspi
Volvo 260, 760 & 960
0
Jun 6, 2010 06:24 PM
wolfpackman409
Volvo 240, 740 & 940
7
Nov 11, 2008 12:53 AM



