Key cylinder won't turn to position III (starting)

Reply Subscribe

Thread Tools

Search this Thread

#21

12-31-2019, 12:13 PM

Starman

Junior Member

Join Date: Dec 2019

Posts: 1

Likes: 0

Received 0 Likes on 0 Posts

I want to thank you so much! I just did this and it works! The only thing the round disc keeps going back into the bad position. Do I have to drill a new screw hole?
Happy new year wishes

Reply Like

#22

01-01-2020, 03:15 AM

Gary Green

Junior Member

Join Date: Feb 2012

Posts: 16

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by davidx1994

So I had to leave my car in a parking lot last night because the key would not turn past position 3. It gets stuck right before you can crank the car.
I read that a piece of metal in the cylinder/ tumbler breaks and causes you to not be able to turn the ignition all the way. I got the car to start this morning by turning the electronic switch while the key is in the ignition.

Is there anyway to rig this or fix it so I can at least turn the key all the way? I would rather not have to pay for new keys and a cylinder/ tumbler and programming

IF YOU GET WIRING DIAGRAM U CAN SEE THAT IGNITION ON 3 IS OK TO RUN THEN YOU JUST NEED PUSHBUTTON FOR START CIRCIUT WHICH IS IN WIRING GOIN TO IGNITION SWITCH which cost about $10 to sort ...hey it won.t be original but it works and is cheap

Reply Like