Does someone have a diagram of the tubing to the pcv system to a 99 no turbo. I just replaced the tank and all the hoses and something doesn't seem right. It seems they have how to on turbo car only.
Thanks

 

see attached pdf

Tim
800.234.5394

 

Tim that great thanks, It seems I have that correct, do you have the air box side? The pcv and vacuum hoses as well.

 

I finally put everything back together and it starts and idles fine. Then I hit the accelerator and it goes dead for a second and then revs. I don't have any check end lights on but there must be one of the tubes are on backwards. I need real help here. Can someone show me a diagram from the engine to the air box the whole pcv system? I seems the one from the fuel rail and the intake are mixed up but not sure!!

 

There are many turbo diy videos but not non-turbo.

 

Anybody with an idea?

 

There should be a vacuum diagram sticker under the hood - start with that

 

I looked for the diagram and I don't have one. Can you help me with these pictures?

 

The long tube that goes to the oil tank and goes under the intake, does that go the the tube on the fuel rail?