S70 base - which inner tie rod?
Thread Starter
|
Junior Member
Joined: Mar 2010
Posts: 11
Likes: 0
From: Bolingbrook, IL
S70 base - which inner tie rod?
Hi,
I have bad outer tie rods so I wanted to replace the inner too, however there seems to be two types - one for TRW rack and one for SMI rack (14mm and 16mm), I am confused - which one do I need?
Thank you in advance,
Nick
PS - Forgot to mention - 1998 non-turbo s70
I have bad outer tie rods so I wanted to replace the inner too, however there seems to be two types - one for TRW rack and one for SMI rack (14mm and 16mm), I am confused - which one do I need?
Thank you in advance,
Nick
PS - Forgot to mention - 1998 non-turbo s70
Last edited by nsimov; Jul 12, 2011 at 01:44 PM. Reason: updated car
Thread Starter
|
Junior Member
Joined: Mar 2010
Posts: 11
Likes: 0
From: Bolingbrook, IL
Nevermind - I found it
You can determine the original steering rack brand by looking at the product plate, which is located on the driver side wheel well. Check the fifth line of the plate and the last digit. 4 = TRW, 5 = SMI.
You can determine the original steering rack brand by looking at the product plate, which is located on the driver side wheel well. Check the fifth line of the plate and the last digit. 4 = TRW, 5 = SMI.
Thread
Thread Starter
Forum
Replies
Last Post
