Soft Brake Pedal - a Mystery on a 07 AWD V8
Thread Starter
|
Junior Member
Joined: Jan 2025
Posts: 2
Likes: 0
Soft Brake Pedal - a Mystery on a 07 AWD V8
Hello All,
Brand New Here!
Please feel free to let me know if I'm out of the rules lane.
I started replacing struts all around and front control arms. While apart, I put new brake pads in and had rotors resurfaced. I completed the front end and at this point when I went to turn the car around to raise the rear, I drove a short distance and the pedal is soft or spongy yet the car still stops fine. I never cracked a line; just opened the fluid reservoir to push the caliper pistons back so the new pads would fit. There are no DTC codes no ABS warning light. Am I missing something?
Any thoughts?
Brand New Here!
Please feel free to let me know if I'm out of the rules lane.
I started replacing struts all around and front control arms. While apart, I put new brake pads in and had rotors resurfaced. I completed the front end and at this point when I went to turn the car around to raise the rear, I drove a short distance and the pedal is soft or spongy yet the car still stops fine. I never cracked a line; just opened the fluid reservoir to push the caliper pistons back so the new pads would fit. There are no DTC codes no ABS warning light. Am I missing something?
Any thoughts?
Thread
Thread Starter
Forum
Replies
Last Post
