speedometer display question
#1
speedometer display question
Hi There,
The attached picture shows a small square icon (or is it two overlapping squares). This can be found in the top center of the display between the thermometer and the clock. I've indicated the location of the icon with a light blue arrow. Does anyone know what this square indicates?
Thank you!
p.s. it's actually the instrument panel
The attached picture shows a small square icon (or is it two overlapping squares). This can be found in the top center of the display between the thermometer and the clock. I've indicated the location of the icon with a light blue arrow. Does anyone know what this square indicates?
Thank you!
p.s. it's actually the instrument panel
Last edited by mrizzy; 06-28-2017 at 10:16 PM.
#5
It does expand when the HUD adjustments are made- like it grows into the HUD placement instructions. But it also shifts into the Low Gas warnings as well as other things- like air suspension shifts in height when changing drive modes (vehicle going up, going down icons) and other things. It sits as a morphing square when nothing is happening.
Last edited by jakethompVolvoMidlo; 02-24-2022 at 01:34 PM.
#6
Agreed, I thought it was a "notification icon", like "hey, you have a message about your car" type thing.
Let me check with the Spanish guy, (Manual)
It is the "Dynamic symbol" on page 81 of my manual.
Dynamic symbol in basic mode.
In the center of the instrument panel is a dynamic
symbol that changes appearance according to
the type of message displayed. The severity of
the control or warning symbol is indicated by an
amber or red marking around the symbol. An animation
may be used to change the symbol into a
larger image in order to graphically depict the
location of a problem or to clarify information.
Let me check with the Spanish guy, (Manual)
It is the "Dynamic symbol" on page 81 of my manual.
Dynamic symbol in basic mode.
In the center of the instrument panel is a dynamic
symbol that changes appearance according to
the type of message displayed. The severity of
the control or warning symbol is indicated by an
amber or red marking around the symbol. An animation
may be used to change the symbol into a
larger image in order to graphically depict the
location of a problem or to clarify information.
Thread
Thread Starter
Forum
Replies
Last Post