Hello! So like 3months ago i bought '07 xc90 volvo. Changed oil, glow plugs, filters. Like a week ago it started showing yellow triangle on a dashboard with message engine service required. Cleaned fault codes and that message haven't showd up. Today, while driving it showed up. Decided to scan it with delphi ds150, and there was glow plug control fault( glow plugs changed, checked relay it was good too), swirl actuator and air mass meter fault codes. Has anyone fixed these fault codes and could suggest me what should i do? Thanks for any information you will give me!

 

Hi My 2007 2.4 diesel xc90 went sluggish on power. Start again and ran fine for 4 km home. I took for a spin later and it wouldn't rev again. I reversed it in idling back to my gate but stopped. Wet not start again. I noticed that the swirl arm had come off I fit it back on temporarily. Still not starting. Will the ECU need to be reset o r can anyone give me and info. My mechanic will check it later but he not that experienced with these. Could I have done damage.
thanks