Lock Pickers..
#1
#2
depends what you need to have done. You can get a new ignition switch, new lock tumbler/key or both. You may want to call a dealer to check if the new key/tumbler needs to be programmed to match your car for your model year.
See the diagrams and part numbers:
https://www.tascaparts.com/auto-part...tion-lock-scat
See the diagrams and part numbers:
https://www.tascaparts.com/auto-part...tion-lock-scat
#3
OK, I have parts no. 2 and 4 for the ign switch. I don't know whar part no. 3 is, I may not have it.
If I stick in part no. 4 in the ign switch (secures by two screws...) and secuere it, I have part that goes into the ingtion from other side that allows me to get the lights on the board to light up, but the car wont start.
I may have an ignition immoblizer (9203820), but the parts wont tell me...
I have an Volvo XC awd, by the way...
Pictures may be on way, If i figrure out the camera works.
If I stick in part no. 4 in the ign switch (secures by two screws...) and secuere it, I have part that goes into the ingtion from other side that allows me to get the lights on the board to light up, but the car wont start.
I may have an ignition immoblizer (9203820), but the parts wont tell me...
I have an Volvo XC awd, by the way...
Pictures may be on way, If i figrure out the camera works.
Last edited by briankk; 02-01-2019 at 04:13 PM. Reason: Parts screw up..
Thread
Thread Starter
Forum
Replies
Last Post