Advice wanted on 1986 240

Old Apr 14, 2019 | 09:44 PM
  #1  
NSVolvo's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2019
Posts: 1
Likes: 0
Default Advice wanted on 1986 240

Hey guys I'm going to look at this volvo in a couple days:

https://www.kijiji.ca/v-view-details...dId=1427107815

Current owner is a Caterpillar mechanic, I've seen the car once and (aesthetics aside) its in beautiful shape. No rust (which is really rare here), engine seems to be running great, albeit a bit loud.

I really have no experience with these cars although my last car was a '78 Mercedes 240D. Just wondering if there's anything specific I should look at for these cars like compression test, electrical areas, etc...

Any advice would be greatly appreciated.
 
Reply
Old Apr 15, 2019 | 07:00 AM
  #2  
silvermine's Avatar
Senior Member
Joined: Dec 2014
Posts: 721
Likes: 26
From: FL
Default

yikes that certainly does seem to be a 'unique' example by the looks of it! i guess the first thing i would check you being in NS is to
make sure the heater/ac blower motor works well without squeaking etc., cause no doubt you will need it....
 

Last edited by silvermine; Apr 15, 2019 at 08:25 AM.
Reply
Old Apr 15, 2019 | 07:14 AM
  #3  
jagtoes's Avatar
Senior Member
Joined: Jan 2011
Posts: 1,210
Likes: 14
From: New York
Default

Sorry but I'd offer $500 and hope he would refuse it. How a person takes care of something says a lot about the condition of the rest of the car. It's a beater and by the looks of the exterior I can't imagine what the rest of the car is like. Just my opinion.
 
Reply
Old Apr 15, 2019 | 07:36 AM
  #4  
1967 Tempest's Avatar
Member
Joined: Apr 2019
Posts: 68
Likes: 0
From: Fayetteville, GA
Default

I would negotiate a better price. My 1986, that I just bought, not running, is in way better shape than that. I have bought many cars that were inflated on price and there is always wiggle room to be had.

Also take a good test drive. I bought a 90 Suburban not too long ago and the area that I bought it in, there were no roads safe or long enough to get the truck up to highway speeds. Found out as soon as I bought it that it would not go over 60MPH as it has SERIOUS shaking and shimmying... Ripped the front end apart and the upper and lower ball joints on both sides were toast. The PO told me it cruises at 70 fine. That was a case of getting a better vehicle outside and in to warrant letting that slide....

0.02$$

Post pictures of interior after you see it...
 
Reply
Old Apr 15, 2019 | 08:31 AM
  #5  
silvermine's Avatar
Senior Member
Joined: Dec 2014
Posts: 721
Likes: 26
From: FL
Default

Originally Posted by jagtoes
Sorry but I'd offer $500 and hope he would refuse it. How a person takes care of something says a lot about the condition of the rest of the car. It's a beater and by the looks of the exterior I can't imagine what the rest of the car is like. Just my opinion.
Yes and that is in Canadian Dollars !!
 
Reply
Old Apr 15, 2019 | 04:46 PM
  #6  
pierce's Avatar
no mo volvo
Joined: Oct 2010
Posts: 11,289
Likes: 109
From: 37 North on the left coast
Default

thats a carburetted 1982, not a 1986.
 
Reply
Old Apr 15, 2019 | 06:12 PM
  #7  
lev's Avatar
lev
Senior Member
Joined: Oct 2010
Posts: 4,540
Likes: 137
Default

May be the rust is under the stickers... Doesn't seem like a great find, hard to say without more/better pictures.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nilsh32
Volvo 240, 740 & 940
13
Jan 30, 2014 11:08 PM
palebot
Volvo 240, 740 & 940
3
Sep 4, 2011 12:30 PM
blaze
Volvo 240, 740 & 940
2
Mar 16, 2009 11:24 PM
blaze
Volvo 240, 740 & 940
4
Mar 15, 2009 09:49 PM
sarah42503
Volvo 240, 740 & 940
5
Mar 29, 2007 03:11 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:53 PM.