It’s my first post so …. Hello everyone [sm=happybounce.gif]

Ok I have a problem and don’t know what it means, when I turn the A/C on and after a few seconds I see both the “off” and the recycle / internal air light blinking together.

Also another small thing, some times at the stop light it stalls a little and shake but just for a second…. Is that normal?

One last thing, is there any chance I could buy a software that could reprogram a remote and also can read any stored codes?

Thanks in advance,
Adsonic

 

1. You have codes in the A/C system thats why the lights blink.

2.You might want to check for tune up and make sure the throttle body isn't dirty.

3.The Dealer needs to program the remove.
Yours is a 1998 if you get a decent scanner you should be able to read and clear codes.

 

Thanks for the reply, I really appreciate it …

But one small note about the scanner, wouldn’t it be cheaper to buy a PCM cable and use a free (if passable) software to read the codes? I’m only checking cus I’m used to pulling the codes of my Impala SS PCM (OBDII) like that.

Anyway, I checked E-Bay and found this scanner … what do you think of it? Is it good enough for the job?

http://cgi.ebay.com/ebaymotors/OBD2-...QQcmdZViewItem


Thanks,
Adsonic

 

That scanner should do the job. You could try the other setup on the Volvo but not sure it will work.

 

I'll get that scanner, thanks for everything.

P.S: love the wing on your Mustang

 

Thanks but kind of looking for a 850 one for the car.

That used to have side wings on it but the plastic broke off.

 

Never the less it still looks great [sm=smiley20.gif]

 

Thanks more to come Slowly.