Reset maintenance light 2014 XC60
I just did my first oil change on my 2014 XC60. Does anyone know how to reset the maintenance light. The display is not the same as a 2013 so the procedure is not the same.
Drill hole in the vertical and use it to mark a hole in the horizontal.
-----------------------
I think I'll have to treat myself to a new Blue Dot Beach Dress soon.
-----------------------
I think I'll have to treat myself to a new Blue Dot Beach Dress soon.
Last edited by ScootJecax; Dec 30, 2013 at 08:44 PM.
After 3 emails to Volvo...here is the procedure...
PROCEDURE TO RESET MAINTENANCE LIGHT ON 2014 XC60
1. Set the vehicle to ignition position I.
2. Press and hold in the reset button for the trip meter.
3. Press and hold in the OK-button on the left steering wheel stalk
4. Ignition switch position II.
5. Wait 10 seconds.
6. Release the reset button when the information light starts to flash.
7. Set the ignition to the OFF position for at least 3 minutes.
The instrument beeps when resetting has been successful.
PROCEDURE TO RESET MAINTENANCE LIGHT ON 2014 XC60
1. Set the vehicle to ignition position I.
2. Press and hold in the reset button for the trip meter.
3. Press and hold in the OK-button on the left steering wheel stalk
4. Ignition switch position II.
5. Wait 10 seconds.
6. Release the reset button when the information light starts to flash.
7. Set the ignition to the OFF position for at least 3 minutes.
The instrument beeps when resetting has been successful.
I have the 'time for a service message' still showing. My mechanic said he cannot remove it as he is not a specific Volvo workshop. Could someone please tell me the procedure to remove unwanted messages?
Thread
Thread Starter
Forum
Replies
Last Post




