Hi all, been hearing a little grinding noise coming from the rear. Sounds like a bearing. For the last couple weeks I'd been trying to find something to show me a DIY on how to do this procedure, but I haven't had any luck. This past weekend I took one of the axles out just to get a feel for how difficult this job could be. Removal of the axle was easy, but I haven't the foggiest idea how to get the bearing off. Anything information or site anyone can point me to would be greatly appreciated.







Thanks
Dom

 

It's pressed on. Take it to a machine shop, won't get charged much.

 

I was hoping to get it done without the help of a shop. Our schedules don't really sync up. No other ways?

Thanks
Dom

 

Well, there are other ways but the $20 a machine shop should charge is cheaper than those other ways.