Volvo 850 Made from 1993 to 1997, this Volvo line was available in both a wagon and a sedan, both with were graced with several trim levels.

850 studdering at WOT

Old Aug 19, 2013 | 08:21 AM
  #1  
bbiljah's Avatar
Thread Starter
|
Member
Joined: Aug 2013
Posts: 55
Likes: 0
From: Edgewater
Default 850 studdering at WOT

in sport mode if I hit the gas she studders and wont take off =/ also my O2 sensor is bad but I don't think that would cause this problem..
I'll post a vid below yes I know my speedo wont work lol I was driving to work, don't hate haha. I can put a better vid up later if need be.

 

Last edited by bbiljah; Aug 19, 2013 at 08:24 AM.
Reply
Old Aug 19, 2013 | 08:52 AM
  #2  
MattyXXL's Avatar
Senior Member
Joined: Dec 2010
Posts: 1,264
Likes: 0
From: Miami, FL
Default

Stage "0"...
 
Reply
Old Aug 19, 2013 | 08:54 AM
  #3  
bbiljah's Avatar
Thread Starter
|
Member
Joined: Aug 2013
Posts: 55
Likes: 0
From: Edgewater
Default

Originally Posted by MattyXXL
Stage "0"...
I was afraid someone would say that lol, but what if that doesn't fix it... then I'm up ****s creek.. Cause it runs fine just not at high boost
 
Reply
Old Aug 19, 2013 | 09:21 AM
  #4  
rspi's Avatar
Administrator
Joined: Mar 2009
Posts: 15,736
Likes: 36
From: Albuquerque, NM
Default

What he said.

Besides that, if you know you have a crack in an intake hose or connection you need to fix it. Do you have an issue with the shutter in E at WOT? The problem could be that your intake hose is colasping. The one at the top of the radiator.
 
Reply
Old Aug 19, 2013 | 10:04 AM
  #5  
bbiljah's Avatar
Thread Starter
|
Member
Joined: Aug 2013
Posts: 55
Likes: 0
From: Edgewater
Default

E @ WOP I never seemed to notice I mostly drive in sport, when I'm off work I'll take it would and try E been thinking about switching over to silicone hosesbut there expensive.. I found a set on ebay for $100 but that's the cheapest I found, Ipdusa.com wants $230 for just the Turbo Inlet Hose
 
Reply
Old Aug 19, 2013 | 04:07 PM
  #6  
boxpin's Avatar
Super Moderator
Joined: May 2009
Posts: 2,702
Likes: 1
From: Rocklin, Ca
Default

Spark plugs.

I agree with Stage 0
 
Reply
Old Aug 20, 2013 | 08:35 AM
  #7  
bbiljah's Avatar
Thread Starter
|
Member
Joined: Aug 2013
Posts: 55
Likes: 0
From: Edgewater
Default

I just put new boush plats in, also I just changed my CV axel and put new ATF in and engine mount last night and that helped alot! but she is still doing it.. Thinking about picking up new plug wires, fuel filter, flushing the tranny, new silicone hoses, flushing radiotor, and injector cleaner.
 
Reply
Old Aug 20, 2013 | 09:36 AM
  #8  
MattyXXL's Avatar
Senior Member
Joined: Dec 2010
Posts: 1,264
Likes: 0
From: Miami, FL
Default

Originally Posted by bbiljah
I just put new boush plats in, also I just changed my CV axel and put new ATF in and engine mount last night and that helped alot! but she is still doing it.. Thinking about picking up new plug wires, fuel filter, flushing the tranny, new silicone hoses, flushing radiotor, and injector cleaner.

Ok Ill break it down for you..
  1. Ditch the platinums, they actually run worse. Cheap-o coppers gapped at .026-.028
  2. Change you cap, rotor, and wires
  3. Change your air filter
  4. change you rfuel filter
  5. check all your vac elbows
  6. check all your vac lines
  7. test to see if the pcv is clogged
  8. Run only 91 octane and above.
  9. use a quality oil and filter

Do that first then report back... You will be pleasantly surprised
 
Reply
Old Aug 20, 2013 | 09:45 AM
  #9  
bbiljah's Avatar
Thread Starter
|
Member
Joined: Aug 2013
Posts: 55
Likes: 0
From: Edgewater
Default

Originally Posted by MattyXXL
Ok Ill break it down for you..
  1. Ditch the platinums, they actually run worse. Cheap-o coppers gapped at .026-.028
  2. Change you cap, rotor, and wires
  3. Change your air filter
  4. change you rfuel filter
  5. check all your vac elbows
  6. check all your vac lines
  7. test to see if the pcv is clogged
  8. Run only 91 octane and above.
  9. use a quality oil and filter
Do that first then report back... You will be pleasantly surprised
champion coppers decent?
 
Reply
Old Aug 20, 2013 | 10:49 AM
  #10  
MattyXXL's Avatar
Senior Member
Joined: Dec 2010
Posts: 1,264
Likes: 0
From: Miami, FL
Default

Ive run them.. they last about 3 oil changes before they need to be replaced.
but for $1.20 a pop I change mine every oil change
 
Reply
Old Aug 20, 2013 | 11:27 AM
  #11  
bbiljah's Avatar
Thread Starter
|
Member
Joined: Aug 2013
Posts: 55
Likes: 0
From: Edgewater
Default

Originally Posted by MattyXXL
Ive run them.. they last about 3 oil changes before they need to be replaced.
but for $1.20 a pop I change mine every oil change
1.20?! at auto zone they told me $2.10 lol
 
Reply
Old Aug 20, 2013 | 12:42 PM
  #12  
MattyXXL's Avatar
Senior Member
Joined: Dec 2010
Posts: 1,264
Likes: 0
From: Miami, FL
Default

I hate autozone LOL Is there a napa or bennet by you..
 
Reply
Old Aug 20, 2013 | 12:50 PM
  #13  
bbiljah's Avatar
Thread Starter
|
Member
Joined: Aug 2013
Posts: 55
Likes: 0
From: Edgewater
Default

Originally Posted by MattyXXL
I hate autozone LOL Is there a napa or bennet by you..
Yea, I'll try there. Thaks for the heads up
 
Reply
Old Aug 20, 2013 | 12:57 PM
  #14  
bbiljah's Avatar
Thread Starter
|
Member
Joined: Aug 2013
Posts: 55
Likes: 0
From: Edgewater
Default

I posted this on FVC by mistake haha meant to go here

Auto zone

Cap $22.99
rotor $17.99
Wires $59.99

Napa

Cap $36
rotor $17.99
wires $86.50

huge difference lol
 
Reply
Old Aug 22, 2013 | 02:18 PM
  #15  
bbiljah's Avatar
Thread Starter
|
Member
Joined: Aug 2013
Posts: 55
Likes: 0
From: Edgewater
Default

Stage 0 fixed it =] I'll soon be converting what hoses I can to silicone for best results, make sure everything is getting the proper flow and what not. Thanks guys!
 
Reply
Old Aug 22, 2013 | 02:40 PM
  #16  
MattyXXL's Avatar
Senior Member
Joined: Dec 2010
Posts: 1,264
Likes: 0
From: Miami, FL
Default

Awesome!

Hope to see you at the next Meet
 
Reply
Old Aug 22, 2013 | 02:41 PM
  #17  
bbiljah's Avatar
Thread Starter
|
Member
Joined: Aug 2013
Posts: 55
Likes: 0
From: Edgewater
Default

Anyone know where to get cheap rims? I REALLY want the R style....
I either wanna get lowering coils and powder coat mine or just get 17"
 
Reply
Old Aug 23, 2013 | 01:24 PM
  #18  
Vmax's Avatar
Senior Member
Joined: Jun 2010
Posts: 752
Likes: 3
From: Palm Springs, FL
Default

Car-part.com
 
Reply
Old Aug 23, 2013 | 07:06 PM
  #19  
MattyXXL's Avatar
Senior Member
Joined: Dec 2010
Posts: 1,264
Likes: 0
From: Miami, FL
Default

Originally Posted by bbiljah
Anyone know where to get cheap rims? I REALLY want the R style....
I either wanna get lowering coils and powder coat mine or just get 17"
Go with FCP, IPD or H&R for the springs
As far as the wheels go... You cant go wrong with 18" Nebula reps --->Volvo 178 Wheels
or atlantis reps--->Volvo 'XC90 Wheels

Both are sub $400

There is also a couple sets of volans (stock R) floating around for sale from anywhere between $500 and $800
 
Reply
Old Aug 24, 2013 | 09:33 AM
  #20  
bbiljah's Avatar
Thread Starter
|
Member
Joined: Aug 2013
Posts: 55
Likes: 0
From: Edgewater
Default

Originally Posted by MattyXXL
Go with FCP, IPD or H&R for the springs
As far as the wheels go... You cant go wrong with 18" Nebula reps --->Volvo 178 Wheels
or atlantis reps--->Volvo 'XC90 Wheels

Both are sub $400

There is also a couple sets of volans (stock R) floating around for sale from anywhere between $500 and $800
Those Nebs are so tempting!!!! UGH haha I REALLY want R style Pegasus rims =] mmmmmmmm But I like the VOXX MG3 I love off set rims, I wish I could find something used... I'm broke... lol my work pays my bills gs and schooling.. limited funds D=
 

Last edited by bbiljah; Aug 24, 2013 at 09:47 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
andrei3333
Volvo S80
6
Mar 12, 2010 10:14 PM
haydenm315
Volvo 850
2
Sep 16, 2009 12:25 PM
kyvahe
Volvo S80
2
Jun 25, 2009 08:04 PM
Cobra_03
Volvo 240, 740 & 940
15
Jan 31, 2009 10:04 AM
hispeed
Nitrous, Super Chargers, & Turbos
9
Apr 9, 2008 05:31 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:49 AM.