flashy rec & ac illuminations!
My turn for this I guess !!
Anyway, since mine is a 95 wagon, am I right in thinking that standing huddled over the little boxs under the hood will result in me locating meaninful codes? And if so, where do I put the jumper and what do I press for climate control feedback? I assume I can get this on a 95?
I suspect 2 or 3 possibilities, feel free to tell me if they sound way off;
1. I recently replaced the blower motor, not the resistor.
2. My blend and response to different air direction is sluggish occasionallly.
3. My A/C is noisy when working, and doesn't appear to be low on freon.
Cheers,
Anyway, since mine is a 95 wagon, am I right in thinking that standing huddled over the little boxs under the hood will result in me locating meaninful codes? And if so, where do I put the jumper and what do I press for climate control feedback? I assume I can get this on a 95?
I suspect 2 or 3 possibilities, feel free to tell me if they sound way off;
1. I recently replaced the blower motor, not the resistor.
2. My blend and response to different air direction is sluggish occasionallly.
3. My A/C is noisy when working, and doesn't appear to be low on freon.
Cheers,
ORIGINAL: Mass850
Anyway, since mine is a 95 wagon, am I right in thinking that standing huddled over the little boxs under the hood will result in me locating meaninful codes? And if so, where do I put the jumper and what do I press for climate control feedback? I assume I can get this on a 95?
Anyway, since mine is a 95 wagon, am I right in thinking that standing huddled over the little boxs under the hood will result in me locating meaninful codes? And if so, where do I put the jumper and what do I press for climate control feedback? I assume I can get this on a 95?
I believe the jumper is on the B box, but I'm not sure which one exactly. http://www.troublecodes.net/Volvo/ will show you how to access trouble codes.
I would think the code would have to do with reason #2. When my blower died I didn't get any codes and I had to replace both motor and resistor.
Thread
Thread Starter
Forum
Replies
Last Post




