slight vibration
Thread Starter
|
Junior Member
Joined: Jan 2016
Posts: 9
Likes: 0
slight vibration
2007 volvo s70 glt with 177,000 miles
What exactly would need to be replaced to eliminate all vibration from a running engine? It's not bad but I know it didn't vibrate like that brand new
What exactly would need to be replaced to eliminate all vibration from a running engine? It's not bad but I know it didn't vibrate like that brand new
Senior Member
Joined: May 2012
Posts: 1,988
Likes: 52
From: Kingsport, TN
Something that would be worth a try is replacing motor mounts.
Philosophically, I think a full engine overhaul with additional balancing would help vibration a little. Engine vibration is necessary because the crank is being accelerated intermittently by explosions, and the block is also being pushed the opposite way by the same events. Vibration worsening caused by normal wear and tear would fall into two categories in my opinion: 1 is differences in leak down of the different cylinders. 2 is clearances that are larger than they should be. An overhaul should improve both of those.
Philosophically, I think a full engine overhaul with additional balancing would help vibration a little. Engine vibration is necessary because the crank is being accelerated intermittently by explosions, and the block is also being pushed the opposite way by the same events. Vibration worsening caused by normal wear and tear would fall into two categories in my opinion: 1 is differences in leak down of the different cylinders. 2 is clearances that are larger than they should be. An overhaul should improve both of those.
Thread Starter
|
Junior Member
Joined: Jan 2016
Posts: 9
Likes: 0
Something that would be worth a try is replacing motor mounts.
Philosophically, I think a full engine overhaul with additional balancing would help vibration a little. Engine vibration is necessary because the crank is being accelerated intermittently by explosions, and the block is also being pushed the opposite way by the same events. Vibration worsening caused by normal wear and tear would fall into two categories in my opinion: 1 is differences in leak down of the different cylinders. 2 is clearances that are larger than they should be. An overhaul should improve both of those.
Philosophically, I think a full engine overhaul with additional balancing would help vibration a little. Engine vibration is necessary because the crank is being accelerated intermittently by explosions, and the block is also being pushed the opposite way by the same events. Vibration worsening caused by normal wear and tear would fall into two categories in my opinion: 1 is differences in leak down of the different cylinders. 2 is clearances that are larger than they should be. An overhaul should improve both of those.
Thread
Thread Starter
Forum
Replies
Last Post
valiant67
New Members Area
1
Mar 4, 2008 03:27 AM
