Ok I am doing some work on an S80 for a friend. One of the things I need to do is pull off the left rear interior panel but I am not sure about those plastic rivets. Do I just push in the center pin and dig it out of the door and re-use or do I break and replace them? The problem I need to fix is with the door lock. You have to manually lock and unlock the door as the power option has stopped working. When the lock is pulled up or pushed down I can here the actuator working it just won't unlock or lock the door. Any ideas?

Thank you,

Paul

 

Yes push the center in you will feel it click. Then pull the entire clip out.

About the door lock usually that is the assembly being bad.

 

Thanks I will check it out.